V-900
Spring Rewind Reels
To handle 1-1/4" or 1-1/2" I.D. hose
Jet/AV Gas Fuel Dispensing
- Roll-formed channel frame construction.
- Non-sparking ratchet assembly.
- Declutching arbor to prevent damage from reverse winding.
- Standard inlet, outlet riser and hub assembly are aluminum for jet fuels.
- Standard inlet: 90° swivel joint, 1-1/2" female NPT threads and 2" Victaulic® groove.
- Standard outlet: 1-1/2" female NPT threads.
- Standard pressures to 600 psi (41 bar).
- Standard fluid temperatures from -20° F to +212 °F (-29° C to +100° C).
- Consult factory for other pressures and temperatures.
- 4-way roller assembly.
Model shown in image above represents standard SR configuration
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information
Reel Capacity, Dimensions and Details
Reel Capacity:
Show:
Rewind Option:
Show:
Measurements: Standard / Metric
| MODEL | REEL CAPACITY (ft / lbs) | REEL DIMENSIONS (inches) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Weight | A | B | C | D | E | F | G | H | X | Y | Relative Size | |
| V-922-23-24-10.5B | 1-1/4 ID | 40 | 104 | 15.25 | 10 | 10.5 | 25.25 | 22.75 | 24 | 23.88 | 12.5 | 10.5 | 20 | |
| V-922-23-24-10.5B | 1-1/2 ID | 25 | 104 | 15.25 | 10 | 10.5 | 25.25 | 22.75 | 24 | 23.88 | 12.5 | 10.5 | 20 | |
| V-920-25-26-10.5A | 1-1/4 ID | 50 | 127 | 13.25 | 8 | 10.5 | 27 | 24.75 | 22.75 | 25.88 | 13.5 | 8.5 | 21.75 | |
| V-920-25-26-10.5A | 1-1/2 ID | 40 | 127 | 13.25 | 8 | 10.5 | 27 | 24.75 | 22.75 | 25.88 | 13.5 | 8.5 | 21.75 | |
| V-922-30-31-10.5A | 1-1/4 ID | 75 | 156 | 15.25 | 10 | 10.5 | 30.5 | 28.75 | 24.75 | 31.38 | 17 | 10.5 | 25.25 | |
| V-922-30-31-10.5A | 1-1/2 ID | 50 | 156 | 15.25 | 10 | 10.5 | 30.5 | 28.75 | 24.75 | 31.38 | 17 | 10.5 | 25.25 | |
| No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results. | ||||||||||||||
- Specifications subject to change.
- Reel models and capacities shown are for standard drag applications; for vertical lift applications, consult factory.
- Other sizes, from standard components, available on request.
- Be sure to check dimensions and weights prior to ordering.
Note: A hose stop is necessary to keep spring from unwinding. A flexible connector must be used between the inlet pipe and the inlet swivel joint.
Request a Quote
To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.