Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

SF

For Booster Hose Inboard Mounted Motor

To handle 3/4" I.D. or 1" I.D. hose.


  • Inboard motor location high profile.  
  • Standard booster hose reel is steel, painted graphite. Aluminum or stainless steel construction is also available.
  • Super Booster (SB) aluminum construction reels weigh up to 30% less than standard booster reels.
  • Choose chain and sprocket rewind powered by either electric or compressed air motor
  • Pinion brake standard.   
  • Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads.  
  • Standard outlet: 1" male NST threads (1.375" x 8 threads per inch).   
  • Consult factory for other sizes and/or threads.  
  • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).   
  • Rollers and roller mounting brackets are accessory items. Specify roller position.  
  • Standard pressures to 1000 psi (69 bar).  
  • Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C).
  • Consult factory for other pressures and temperatures.  
  • CAUTION: When using Niedner|Altra® hose, a special riser and/or larger drum diameter is required.


Model shown in image above represents standard configuration with electric rewind (E)


@ Email this page
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information

Reel Capacity, Dimensions and Details

Reel Capacity:

Show:


Rewind Option:

Show:

Measurements: Standard / Metric
MODEL REEL CAPACITY (ft / lbs) REEL DIMENSIONS (inches)
Size Length Weight A B C D E F G H X Y Relative Size
ESF32-19-21-10.5 3/4 ID 175 142 29 24 10.5 20.5 21.62 34 25.12 15.75 21.5 16.75
ESF32-19-21-10.5 1 ID 85 142 29 24 10.5 20.5 21.62 34 25.12 15.75 21.5 16.75
ESF24-23-24-10.5 3/4 ID 150 132 20.5 15.5 10.5 23.5 23 25.5 29.25 17.88 13 19.75
ESF24-23-24-10.5 1 ID 125 132 20.5 15.5 10.5 23.5 23 25.5 29.25 17.88 13 19.75
ESF30-23-24-10.5 3/4 ID 225 145 27 22 10.5 23.5 23 32 29.25 17.88 19.5 19.75
ESF30-23-24-10.5 1 ID 200 145 27 22 10.5 23.5 23 32 29.25 17.88 19.5 19.75
EPSF28-25-26-10.5 3/4 ID 275 153 25 20 10.5 25.5 24.75 30 30.88 18.5 17.5 21.75
EPSF28-25-26-10.5 1 ID 175 153 25 20 10.5 25.5 24.75 30 30.88 18.5 17.5 21.75
EPSF34-25-26-10.5 3/4 ID 350 166 31 26 10.5 25.5 24.75 36 30.88 18.5 23.5 21.75
EPSF34-25-26-10.5 1 ID 250 166 31 26 10.5 25.5 24.75 36 30.88 18.5 23.5 21.75
ESF16.5-30-31-10.5 3/4 ID 175 140 13 8 10.5 29 28.75 18 35.62 21.25 5.5 25.25
ESF16.5-30-31-10.5 1 ID 125 140 13 8 10.5 29 28.75 18 35.62 21.25 5.5 25.25
ESF20-30-31-10.5 3/4 ID 250 147 16.5 11.5 10.5 29 28.75 21.5 35.62 21.25 9 25.25
ESF20-30-31-10.5 1 ID 150 147 16.5 11.5 10.5 29 28.75 21.5 35.62 21.25 9 25.25
EPSF24-30-31-10.5 3/4 ID 250 153 20.5 15.5 10.5 29 28.75 25.5 35.62 21.25 13 25.25
EPSF24-30-31-10.5 1 ID 250 153 20.5 15.5 10.5 29 28.75 25.5 35.62 21.25 13 25.25
EPSF28-30-31-10.5 1 ID 300 161 25 20 10.5 29 28.75 30 35.62 21.25 17.5 25.25
EPSF34-30-31-10.5 1 ID 350 174 31 26 10.5 29 28.75 36 35.62 21.25 23.5 25.25
EPSF20-33-34-10.5 3/4 ID 300 157 16.5 11.5 10.5 31.5 31.75 21.12 38.12 22.25 9 27.88
EPSF20-33-34-10.5 1 ID 200 157 16.5 11.5 10.5 31.5 31.75 21.12 38.12 22.25 9 27.88
No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results.
  1. Specifications subject to change.  
  2. A two-way flow hub is available and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end (See Ordering & Accessory Guide.)  
  3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.  
  4. When ordering power rewind models, prefix number with:
    A = Air Rewind (supplied with control valve and 18" air hose)
    E = Electric Rewind (1/3 HP)
    EP = Electric Rewind (1/2 HP) (12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch, but can be ordered separately)
    HD = Hydraulic Rewind (not supplied with control valve)
  5. For polished aluminum reels, prefix complete model number with "SB", for example: SBESF32-19-21.  
  6. All frames are roll-formed channel, except Super Booster, which is square tubing.  
  7. Be sure to check dimensions and weights prior to ordering.  

Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.

Reels handling 175' feet or more of 1” hose must use ½ HP motor.

Request a Quote

To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.

Please review our updated privacy policy containing details on how we collect and use your personal information.

Top