Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

SBF

For Booster Hose

  • Super Booster (SB) aluminum construction reels weigh up to 30% less than standard booster reels.
  • Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic, or compressed air motor.
  • Pinion brake standard.  
  • Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads.  
  • Standard outlet: 1" male NST threads (1.375" x 8 threads per inch.)  
  • Consult factory for other sizes and/or threads.  
  • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).  
  • Rollers and roller mounting brackets are accessory items. Specify roller position.  
  • Standard pressures to 1000 psi (69 bar).  
  • Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C).
  • Consult factory for reels to operate at other pressures and temperatures.  
  • CAUTION: When using Niedner|Altra® hose, a special riser and/or larger drum diameter is required.


Models shown above represent standard configuration
Left: electric rewind (SBEF), Right: manual rewind (SBF)


@ Email this page
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information

Reel Capacity, Dimensions and Details

Reel Capacity:

Show:


Rewind Option:

Show:

Measurements: Standard / Metric
MODEL REEL CAPACITY (ft / lbs) REEL DIMENSIONS (inches)
Size Length Weight A B C D E F G H X Y Relative Size
SBF32-19-21-10.5 3/4 ID 175 86 29.5 24 10.5 20.5 21.62 34.25 21.5 12.12 21.5 16.75
SBF32-19-21-10.5 1 ID 85 86 29.5 24 10.5 20.5 21.62 34.25 21.5 12.12 21.5 16.75
SBF24-23-24-10.5 3/4 ID 150 79 21 15.5 10.5 20.5 23 25.75 23.5 12.12 13 16.75
SBF24-23-24-10.5 1 ID 125 79 21 15.5 10.5 20.5 23 25.75 23.5 12.12 13 16.75
SBF30-23-24-10.5 3/4 ID 225 88 27.5 22 10.5 20.5 23 32.25 23.5 12.12 19.5 16.75
SBF30-23-24-10.5 1 ID 200 88 27.5 22 10.5 20.5 23 32.25 23.5 12.12 19.5 16.75
SBF38-23-24-10.5 3/4 ID 300 100 35 29.5 10.5 20.5 23 39.75 23.5 12.12 27 16.75
SBF38-23-24-10.5 1 ID 250 100 35 29.5 10.5 20.5 23 39.75 23.5 12.12 27 16.75
SBF28-25-26-10.5 3/4 ID 275 93 25.5 20 10.5 25.5 24.75 30.25 27.88 15.5 17.5 21.75
SBF28-25-26-10.5 1 ID 175 93 25.5 20 10.5 25.5 24.75 30.25 27.88 15.5 17.5 21.75
SBF34-25-26-10.5 3/4 ID 350 99 31.5 26 10.5 25.5 24.75 36.25 27.88 15.5 23.5 21.75
SBF34-25-26-10.5 1 ID 250 99 31.5 26 10.5 25.5 24.75 36.25 27.88 15.5 23.5 21.75
SBF16.5-30-31-10.5 3/4 ID 175 83 13.5 8 10.5 25.5 28.75 18.25 29.88 15.5 5.5 21.75
SBF16.5-30-31-10.5 1 ID 125 83 13.5 8 10.5 25.5 28.75 18.25 29.88 15.5 5.5 21.75
SBF20-30-31-10.5 3/4 ID 250 87 17 11.5 10.5 25.5 28.75 21.75 29.88 15.5 9 21.75
SBF20-30-31-10.5 1 ID 150 87 17 11.5 10.5 25.5 28.75 21.75 29.88 15.5 9 21.75
SBF24-30-31-10.5 3/4 ID 350 91 21 15.5 10.5 25.5 28.75 25.75 29.88 15.5 13 21.75
SBF24-30-31-10.5 1 ID 250 91 21 15.5 10.5 25.5 28.75 25.75 29.88 15.5 13 21.75
SBF28-30-31-10.5 1 ID 300 96 25.5 20 10.5 25.5 28.75 30.25 29.88 15.5 17.5 21.75
SBF34-30-31-10.5 1 ID 350 103 31.5 26 10.5 25.5 28.75 36.25 29.88 15.5 23.5 21.75
SBF20-33-34-10.5 3/4 ID 300 87 16.5 11.5 10.5 31.5 31.75 21.12 33.62 17.75 9 27.75
SBF20-33-34-10.5 1 ID 200 87 16.5 11.5 10.5 31.5 31.75 21.12 33.62 17.75 9 27.75
SBAF32-19-21-10.5 3/4 ID 175 106 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
SBAF32-19-21-10.5 1 ID 85 106 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
SBAF24-23-24-10.5 3/4 ID 150 99 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
SBAF24-23-24-10.5 1 ID 125 99 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
SBAF30-23-24-10.5 3/4 ID 225 108 27.5 22 10.5 20.5 23 32.38 23.5 12.12 19.5 16.75
SBAF30-23-24-10.5 1 ID 200 108 27.5 22 10.5 20.5 23 32.38 23.5 12.12 19.5 16.75
SBAF38-23-24-10.5 3/4 ID 300 120 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
SBAF38-23-24-10.5 1 ID 250 120 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
SBAF28-25-26-10.5 3/4 ID 275 113 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
SBAF28-25-26-10.5 1 ID 175 113 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
SBAF34-25-26-10.5 3/4 ID 350 119 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
SBAF34-25-26-10.5 1 ID 250 119 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
SBAF16.5-30-31-10.5 3/4 ID 175 103 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
SBAF16.5-30-31-10.5 1 ID 125 103 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
SBAF20-30-31-10.5 3/4 ID 250 107 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
SBAF20-30-31-10.5 1 ID 150 107 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
SBAF24-30-31-10.5 3/4 ID 350 111 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
SBAF24-30-31-10.5 1 ID 250 111 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
SBAF28-30-31-10.5 1 ID 300 116 25.5 20 10.5 25.5 28.75 32.25 29.88 15.5 17.5 21.75
SBAF34-30-31-10.5 1 ID 350 123 31.5 26 10.5 25.5 28.75 38.25 29.88 15.5 23.5 21.75
SBAF20-33-34-10.5 3/4 ID 300 107 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
SBAF20-33-34-10.5 1 ID 200 107 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
SBEF32-19-21-10.5 3/4 ID 175 126 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
SBEF32-19-21-10.5 1 ID 85 126 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
SBEF24-23-24-10.5 3/4 ID 150 119 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
SBEF24-23-24-10.5 1 ID 125 119 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
SBEF30-23-24-10.5 3/4 ID 225 128 27.5 22 10.5 20.5 23 32.38 23.5 12.12 19.5 16.75
SBEF30-23-24-10.5 1 ID 200 128 27.5 22 10.5 20.5 23 32.38 23.5 12.12 19.5 16.75
SBEPF38-23-24-10.5 3/4 ID 300 140 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
SBEPF38-23-24-10.5 1 ID 250 140 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
SBEPF28-25-26-10.5 3/4 ID 275 133 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
SBEPF28-25-26-10.5 1 ID 175 133 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
SBEPF34-25-26-10.5 3/4 ID 350 139 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
SBEPF34-25-26-10.5 1 ID 250 139 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
SBEF16.5-30-31-10.5 3/4 ID 175 123 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
SBEF16.5-30-31-10.5 1 ID 125 123 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
SBEF20-30-31-10.5 3/4 ID 250 127 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
SBEF20-30-31-10.5 1 ID 150 127 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
SBEPF24-30-31-10.5 3/4 ID 350 131 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
SBEPF24-30-31-10.5 1 ID 250 131 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
SBEPF28-30-31-10.5 1 ID 300 136 25.5 20 10.5 25.5 28.75 32.25 29.88 15.5 17.5 21.75
SBEPF34-30-31-10.5 1 ID 350 143 31.5 26 10.5 25.5 28.75 38.25 29.88 15.5 23.5 21.75
SBEPF20-33-34-10.5 3/4 ID 300 127 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
SBEPF20-33-34-10.5 1 ID 200 127 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results.
  1. Specifications subject to change.  
  2. A two-way flow hub is available and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end.  
  3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.  
  4. When ordering power rewind models, prefix number with:
    SBA = Air Rewind (supplied with control valve and 18" air hose)
    SBE = Electric Rewind (1/3 HP)
    SBEP = Electric Rewind (1/2 HP) (12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch, but can be ordered separately)
    SBHD = Hydraulic Rewind (not supplied with control valve)
      for example: SBEF32-19-21
  5. Reels handling 200' or more must use 1/2 HP motor. (Use prefix EP when ordering.)  
  6. When installing FH-3 rollers add 4-1/2" to "D" dimension.  
  7. Be sure to check dimensions and weights prior to ordering.

Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.

Request a Quote

To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.

Please review our updated privacy policy containing details on how we collect and use your personal information.

Top