Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

Reel Selector

Find your model with our interactive Reel Selector.

Reel Selector

Reels 101

Not sure what reel you need?

Learn more

F

For Booster Hose

To handle 3/4" I.D. or 1" I.D. hose.


  • Standard booster hose reel is steel, painted graphite. Aluminum or stainless steel construction is also available.
  • Super Booster (SB) aluminum construction reels weigh up to 30% less than standard booster reels.
  • Gear-driven crank rewind is standard. Choose chain and sprocket drive powered by electric, hydraulic, or compressed air motor.
  • Pinion brake standard.
  • Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads
  • Standard outlet: 1" male NST threads (1.375" x 8 threads per inch.)
  • Consult factory for other sizes and/or threads.
  • Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
  • Rollers and roller mounting brackets are accessory items. Specify roller position.
  • Standard pressures to 1000 psi (69 bar).
  • Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C).
  • Consult factory for reels to operate at other pressures and temperatures.
  • CAUTION: When using Niedner|Altra® hose, a special riser and/or larger drum diameter is required.


Models shown above represent standard configuration
Left: electric rewind (E), Right: manual rewind


@ Email this page
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information

Reel Capacity, Dimensions and Details

Reel Capacity:

Show:


Rewind Option:

Show:

Measurements: Standard / Metric
MODEL REEL CAPACITY (ft / lbs) REEL DIMENSIONS (inches)
Size Length Weight A B C D E F G H X Y Relative Size
F32-19-21-10.5 3/4 ID 175 102 29.5 24 10.5 20.5 21.62 34.25 21.5 12.12 21.5 16.75
F32-19-21-10.5 1 ID 85 102 29.5 24 10.5 20.5 21.62 34.25 21.5 12.12 21.5 16.75
F24-23-24-10.5 3/4 ID 150 92 21 15.5 10.5 20.5 23 25.75 23.5 12.12 13 16.75
F24-23-24-10.5 1 ID 125 92 21 15.5 10.5 20.5 23 25.75 23.5 12.12 13 16.75
F30-23-24-10.5 3/4 ID 225 105 27.5 22 10.5 20.5 23 32.25 23.5 12.12 19.5 16.75
F30-23-24-10.5 1 ID 200 105 27.5 22 10.5 20.5 23 32.25 23.5 12.12 19.5 16.75
F38-23-24-10.5 3/4 ID 300 120 35 29.5 10.5 20.5 23 39.75 23.5 12.12 27 16.75
F38-23-24-10.5 1 ID 250 120 35 29.5 10.5 20.5 23 39.75 23.5 12.12 27 16.75
F28-25-26-10.5 3/4 ID 275 113 25.5 20 10.5 25.5 24.75 30.25 27.88 15.5 17.5 21.75
F28-25-26-10.5 1 ID 175 113 25.5 20 10.5 25.5 24.75 30.25 27.88 15.5 17.5 21.75
F34-25-26-10.5 3/4 ID 350 126 31.5 26 10.5 25.5 24.75 36.25 27.88 15.5 23.5 21.75
F34-25-26-10.5 1 ID 250 126 31.5 26 10.5 25.5 24.75 36.25 27.88 15.5 23.5 21.75
F16.5-30-31-10.5 3/4 ID 175 100 13.5 8 10.5 25.5 28.75 18.25 29.88 15.5 5.5 21.75
F16.5-30-31-10.5 1 ID 125 100 13.5 8 10.5 25.5 28.75 18.25 29.88 15.5 5.5 21.75
F20-30-31-10.5 3/4 ID 250 107 17 11.5 10.5 25.5 28.75 21.75 29.88 15.5 9 21.75
F20-30-31-10.5 1 ID 150 107 17 11.5 10.5 25.5 28.75 21.75 29.88 15.5 9 21.75
F24-30-31-10.5 3/4 ID 350 113 21 15.5 10.5 25.5 28.75 25.75 29.88 15.5 13 21.75
F24-30-31-10.5 1 ID 250 113 21 15.5 10.5 25.5 28.75 25.75 29.88 15.5 13 21.75
F28-30-31-10.5 1 ID 300 121 25.5 20 10.5 25.5 28.75 30.25 29.88 15.5 17.5 21.75
F34-30-31-10.5 1 ID 350 134 31.5 26 10.5 25.5 28.75 36.25 29.88 15.5 23.5 21.75
F20-33-34-10.5 3/4 ID 300 107 16.5 11.5 10.5 31.5 31.75 21.12 33.62 17.75 9 27.75
F20-33-34-10.5 1 ID 200 107 16.5 11.5 10.5 31.5 31.75 21.12 33.62 17.75 9 27.75
AF32-19-21-10.5 3/4 ID 175 122 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
AF32-19-21-10.5 1 ID 85 122 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
AF24-23-24-10.5 3/4 ID 150 112 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
AF24-23-24-10.5 1 ID 125 112 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
AF30-23-24-10.5 3/4 ID 225 125 27.5 22 10.5 20.5 23 34.25 23.5 12.12 19.5 16.75
AF30-23-24-10.5 1 ID 200 125 27.5 22 10.5 20.5 23 34.25 23.5 12.12 19.5 16.75
AF38-23-24-10.5 3/4 ID 300 140 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
AF38-23-24-10.5 1 ID 250 140 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
AF28-25-26-10.5 3/4 ID 275 133 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
AF28-25-26-10.5 1 ID 175 133 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
AF34-25-26-10.5 3/4 ID 350 146 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
AF34-25-26-10.5 1 ID 250 146 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
AF16.5-30-31-10.5 3/4 ID 175 120 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
AF16.5-30-31-10.5 1 ID 125 120 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
AF20-30-31-10.5 3/4 ID 250 127 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
AF20-30-31-10.5 1 ID 150 127 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
AF24-30-31-10.5 3/4 ID 350 133 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
AF24-30-31-10.5 1 ID 250 133 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
AF28-30-31-10.5 1 ID 300 141 25.5 20 10.5 25.5 28.75 32.25 29.88 15.5 17.5 21.75
AF34-30-31-10.5 1 ID 350 154 31.5 26 10.5 25.5 28.75 38.25 29.88 15.5 23.5 21.75
AF20-33-34-10.5 3/4 ID 300 127 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
AF20-33-34-10.5 1 ID 200 127 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
EF32-19-21-10.5 3/4 ID 175 142 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
EF32-19-21-10.5 1 ID 85 142 29.5 24 10.5 20.5 21.62 34.38 21.5 12.12 21.5 16.75
EF24-23-24-10.5 3/4 ID 150 132 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
EF24-23-24-10.5 1 ID 125 132 21 15.5 10.5 20.5 23 25.88 23.5 12.12 13 16.75
EPF30-23-24-10.5 3/4 ID 225 145 27.5 22 10.5 20.5 23 34.25 23.5 12.12 19.5 16.75
EPF30-23-24-10.5 1 ID 200 145 27.5 22 10.5 20.5 23 34.25 23.5 12.12 19.5 16.75
EPF38-23-24-10.5 3/4 ID 300 160 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
EPF38-23-24-10.5 1 ID 250 160 35 29.5 10.5 20.5 23 41.75 23.5 12.12 27 16.75
EPF28-25-26-10.5 3/4 ID 275 153 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
EPF28-25-26-10.5 1 ID 175 153 25.5 20 10.5 25.5 24.75 32.25 27.88 15.5 17.5 21.75
EPF34-25-26-10.5 3/4 ID 350 166 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
EPF34-25-26-10.5 1 ID 250 166 31.5 26 10.5 25.5 24.75 38.25 27.88 15.5 23.5 21.75
EF16.5-30-31-10.5 3/4 ID 175 140 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
EF16.5-30-31-10.5 1 ID 125 140 13.5 8 10.5 25.5 28.75 18.38 29.88 15.5 5.5 21.75
EF20-30-31-10.5 3/4 ID 250 147 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
EF20-30-31-10.5 1 ID 150 147 17 11.5 10.5 25.5 28.75 21.88 29.88 15.5 9 21.75
EPF24-30-31-10.5 3/4 ID 350 153 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
EPF24-30-31-10.5 1 ID 250 153 21 15.5 10.5 25.5 28.75 27.75 29.88 15.5 13 21.75
EPF28-30-31-10.5 1 ID 300 161 25.5 20 10.5 25.5 28.75 32.25 29.88 15.5 17.5 21.75
EPF34-30-31-10.5 1 ID 350 174 31.5 26 10.5 25.5 28.75 38.25 29.88 15.5 23.5 21.75
EPF20-33-34-10.5 3/4 ID 300 147 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
EPF20-33-34-10.5 1 ID 200 147 16.5 11.5 10.5 31.5 31.75 23.25 33.62 17.75 9 27.75
No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results.
  1. Specifications subject to change.
  2. A two-way flow hub is available and must be specified. Assembly is threaded on both ends so swivel joint can be attached at either end of the reel. A pipe cap seals the opposite end.
  3. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
  4. When ordering power rewind models, prefix number with:
    A = Air Rewind (supplied with control valve and 18" air hose)
    E = Electric Rewind (1/3 HP)
    EP = Electric Rewind (1/2 HP) (12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch, but can be ordered separately)
    HD = Hydraulic Rewind (not supplied with control valve)
  5. For polished aluminum reels, prefix complete model number with "SB", for example: SBEF 32-19-21.
  6. Reels handling 175' or more must use 1/2 HP motor. (Use prefix EP when ordering.)
  7. When installing FH-3 rollers add 4-1/2" to "D" dimension.
  8. Be sure to check dimensions and weights prior to ordering.

Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.

Request a Quote

To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.

Please review our updated privacy policy containing details on how we collect and use your personal information.

Top