G2400
Manual Rewind Gas Welding Reels
To handle twin 1/4" through 3/8" I.D. hose
Oxy/Fuel Welding
- Gear-driven crank rewind with pinion brake.
- Two swivel joint inlets and two outlet risers to handle two equal lengths of hose.
- Gear-drive crank rewind.
- Pinion brake as standard.
- Standard inlets: 90° ball bearing swivel joints 1/2" female NPT threads. Oxy/acet brass inlet adapters are available.
- Standard outlets: male 9/16"-18 threads. Right hand for oxygen, left hand for gas.
- Pressures to 300 psi (21 bar).
- Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C). Optional temperature ratings available - consult factory.
- Type of gas used MUST be specified.
Model shown in image above represents standard gear-driven crank rewind configuration
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information
Reel Capacity, Dimensions and Details
Reel Capacity:
Show:
Rewind Option:
Show:
Measurements: Standard / Metric
| MODEL | REEL CAPACITY (ft / lbs) | REEL DIMENSIONS (inches) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Weight | A | B | C | D | E | F | G | H | X | Y | Relative Size | |
| G2416-17-18-8 | 1/4 ID | 150 | 40 | 13 | 8 | 8 | 14.12 | 18 | 18.88 | 18.12 | 9.88 | 11.5 | 10 | |
| G2416-17-18-8 | 3/8 ID | 100 | 40 | 13 | 8 | 8 | 14.12 | 18 | 18.88 | 18.12 | 9.88 | 11.5 | 10 | |
| G2420-17-18-8 | 3/8 ID | 150 | 42 | 17 | 12 | 8 | 14.12 | 18 | 22.88 | 18.12 | 9.88 | 15.5 | 10 | |
| G2426-17-18-8 | 3/8 ID | 200 | 44 | 23 | 18 | 8 | 14.12 | 18 | 28.88 | 18.12 | 9.88 | 21.5 | 10 | |
| No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results. | ||||||||||||||
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown.
- Be sure to check dimensions and weights prior to ordering.
Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
Request a Quote
To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.