F3100
For Industrial Fire Protection
To handle 3/4" I.D. thru 1-1/2" I.D. hose
- The reel can be installed on the floor or wall.
- Steel construction is standard. Aluminum or stainless steel construction is available.
- Choose disc rewind or removable direct crank rewind.
- Supplied with spring actuated pinlock.
- Standard inlet, outlet riser, and hub assembly are steel (also available in stainless steel).
- Rollers and roller mounting brackets are accessory items. Specify roller position.
- Standard inlet: 1" 90° ball bearing swivel joint with 1" female NPT threads.
- Standard outlet: 1" male NST threads (1.375" x 8 threads per inch).
- Consult factory for other sizes and/or threads.
- Standard pressures to 1000 psi (69 bar).
- Standard fluid temperatures from -40° F to +250 °F (-40° C to +121° C)
- Consult factory for other pressures and temperatures.
- Removable crank rewind is standard.
- For hand-over-hand rewind option (less crank), consult factory.
- CAUTION: When using Niedner|Altra® hose, a special riser and/or larger drum diameter is required (consult factory).
Model shown in image above represents standard configuration
Jump to:
Reel Capacity, Dimensions and Details
ISO Parts Drawing
Service Information
Reel Capacity, Dimensions and Details
Reel Capacity:
Show:
Rewind Option:
Show:
Measurements: Standard / Metric
| MODEL | REEL CAPACITY (ft / lbs) | REEL DIMENSIONS (inches) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Length | Weight | A | B | C | D | E | F | G | H | X | Y | Relative Size | |
| F3116-25-26 | 3/4 ID | 100 | 85 | 13 | 7.5 | 10.5 | 25.5 | 24 | 25.5 | 27.88 | 15.5 | 7.75 | 21.75 | |
| F3116-25-26 | 1 ID | 75 | 85 | 13 | 7.5 | 10.5 | 25.5 | 24 | 25.5 | 27.88 | 15.5 | 7.75 | 21.75 | |
| F3120-25-26 | 3/4 ID | 150 | 94 | 17 | 11.5 | 10.5 | 25.5 | 24 | 29.5 | 27.88 | 15.5 | 9 | 21.75 | |
| F3120-25-26 | 1 ID | 100 | 94 | 17 | 11.5 | 10.5 | 25.5 | 24 | 29.5 | 27.88 | 15.5 | 9 | 21.75 | |
| F3124-25-26 | 3/4 ID | 200 | 103 | 21 | 15.5 | 10.5 | 25.5 | 24 | 33.5 | 27.88 | 15.5 | 13 | 21.75 | |
| F3124-25-26 | 1 ID | 125 | 103 | 21 | 15.5 | 10.5 | 25.5 | 24 | 33.5 | 27.88 | 15.5 | 13 | 21.75 | |
| F3128-25-26 | 3/4 ID | 350 | 113 | 25.5 | 20 | 10.5 | 25.5 | 24 | 37 | 27.88 | 15.5 | 17.5 | 21.75 | |
| F3128-25-26 | 1 ID | 250 | 113 | 25.5 | 20 | 10.5 | 25.5 | 24 | 37 | 27.88 | 15.5 | 17.5 | 21.75 | |
| F3124-30-31 | 3/4 ID | 275 | 103 | 21 | 15.5 | 10.5 | 25.5 | 28.75 | 33.5 | 29.88 | 15.5 | 13 | 21.75 | |
| F3124-30-31 | 1 ID | 175 | 103 | 21 | 15.5 | 10.5 | 25.5 | 28.75 | 33.5 | 29.88 | 15.5 | 13 | 21.75 | |
| F3130-30-31 | 1 ID | 300 | 113 | 27.5 | 22 | 10.5 | 25.5 | 28.75 | 40 | 29.88 | 15.5 | 19.5 | 21.75 | |
| No results available based on the combination of filters chosen above. Please choose a different combination of Reel Capacity/Rewind Option to show more results. | ||||||||||||||
- Specifications subject to change.
- Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters.
- Power rewind is not available on these models. See Series "F" or "FF".
- 4" clearance needed for crank handle removal.
- Be sure to check dimensions and weights prior to ordering.
Note: A flexible connector must be used between the inlet pipe and the inlet swivel joint.
Request a Quote
To request a quote, simply complete the form below. It will then be quickly relayed to the person best able to assist you.